Car Repair Tool - OBD2 Scanner - Car Diagnostic Tool

Autel MaxiScope MP408 based 4-channel automotive oscilloscope with PC or MaxiSys Tablet

SKU: C01A109A01
Free Shipping to: United States
Price Protection During 30 Days
Condition:New
Best Offer:
Whatsapp: +86 180 2870 0839
Email: service@autointhebox.com

Availability: In stock

Regular Price: $550.00

Special Price: $459.00 17% Off

The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits. Featuring the user-friendly UI design combined with the unrivalled hardware specs, the MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles. Power for the MaxiScope MP408 Module comes directly from the USB port of the connected PC, making the system very versatile and portable to use.
Autel MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works with PC or MaxiSys Tablet, will offer you an insight to the inner workings of a vehicle’s electronic circuits. It is suitable for most makes and models of modern vehicles. Autel MaxiScope MP408 is features with color coded 4-channel control panel, and could be updated software free online via internet. After connecting PC by the USB port, MaxiScope MP408 will get the power directly, making the system very versatile and portable to use.
Autel MaxiScope MP408 Features:
1. Features one-click auto setup of voltage scale and time base
2. Works on all makes and models of modern vehicles
3. Intuitive UI design features easy trigger point adjustment and real time scale info display
4. Allows manual editing of measurement parameter display
5. Saves and reviews waveform data
6. Free online software update through the Internet
7. Compatible with LIN, CAN and FlexRay data bus standards
8. Reads and displays electrical signals in high resolution waveforms
9. Features color coded 4-channel control panel
10. Portable design with strong housing and protective rubber boot
12. Direct power supply through USB connection
 
Autel MaxiScope MP408
The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits. Featuring the user-friendly UI design combined with the unrivalled hardware specs, the MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles. Power for the MaxiScope MP408 Module comes directly from the USB port of the connected PC, making the system very versatile and portable to use.
Autel MaxiScope MP408 Specifications:
Vertical resolution: 12 bits
Channels: 4
Bandwidth: 20MHz
Accuracy: 1%
Sensitivity: 10mV/div to 20V/div
PC Interface: USB 2.0 – Cable supplied
Power Requirements: Powered from USB port
Input Ranges (full scale): ±v50mV to ±100V in 11 ranges
Input Impedance: 1MΩ in parallel with 22pF
Input Type: Single-ended, BNC connector
Input Coupling: Software selectable AC/DC
Overload Protection: ±200V on single input
Buffer Memory: 32M samples shared among active channels
Waveform Buffer: Up to 1000 waveforms
Timebase Ranges: 100ns/div to 1000s/div
Operating Temperature Range: 0°C to 50°C (15°C to 40°C for quoted accuracy)
Storage Temperature Range: -20°C to +60°C
Storage Humidity Range: 5% to 95%RH, Non-condensing
Dimensions: 190X115X38mm
Weight: < 0.5kg
Maximum Sampling Rate (Single Shot):
-1 or 2 channels in use: 80MS/s
-3 or 4 channels in use: 20MS/s
 
Package Including:
1pcs x Autel MaxiScope MP408 Interface
1pcs x Compact Disc (CD)
1pcs x 1.5m USB Cable
4pcs x 3m (10ft) Screened Test Leads
1pcs x Secondary Ignition Pickup
1pcs x 2-pin Breakout Lead
2pcs x Attenuators 20:1
1pcs x Large Crocodile Clip Set
1pcs x Small Crocodile Clip Set
1pcs x Acupuncture Probe Set
1pcs x Multimeter Probe

Use spaces to separate tags. Use single quotes (') for phrases.

Q:Do this scope works in an autel ds808?
A:Dear Alex, sorry to say this scope MP408 can not work with DS808. We suggest that please consider another model MS906 can meet your demands.For details please click here https://www.amazon.com/dp/B06VW6HM8C
-----------------------------------
Q:What Autel tablets is this scope comparable with?
A:This run with the maxisys pro or windows pc
-----------------------------------
Q:Does the mp408-basic come with all the test leads and adapters as described at the autel web-site?
A:Yes, you get all cords needed to operate the scope.
-----------------------------------
Q:Does it work with Autel Maxisys MS906BT?
A:Dear Christian A.,yes ,MP408 is compatitable with autel products, such as Maxisys MS906BT ,MS908P, etc.
-----------------------------------
Q:Will this work with the matco maxme diagnostic tool?
A:It's for the maxisys or laptop you can download the app at the site http://www.autel.com/Automotive%20Diagnostic%20&%20Analys/545.jhtml
For the laptop
-----------------------------------
Q:What is the tablet for this model autel mp408-basic maxiscope basic kit ?
A:You can use your laptop or the maxisys 908
-----------------------------------
Q:can this be used with maxisys mini?
A:not sure bought it as a gift but i believe the web site tells you what it will work with
-----------------------------------
Q:Does anyone know if all the cables and test leads are included with the basic mp408-basic maxiscope kit?
A:Yes. All the cables and test lead are included.
-----------------------------------
Q:What are the system requirements for operating this with a laptop/tablet??
A:No I can't I sent mine back a bought a pico far better I think.
-----------------------------------
Q:Does this work with the Autel base model MS908?
A:I have the Maxisys Pro. Not sure if it is the same. My machine had the scope program already loaded. Make sure you research all of the features you want. the software running the scope does not allow for some things ie inverting a trace is impossible without plotting another mirror image trace from the math channel. The price was good but if it wont do what you need it to... hope this helps
-----------------------------------
Q:Can this be used with maxisys ms905
A:It should work. I have the maxisys pro and it works with it via usb.
-----------------------------------
Q:Is work with MS906bt?
A:I use mine with the maxi sys pro because of its bigger screen but if the autel tool has the maxi scope ap on it, I am sure it will. I have not tried it with my 906 yet. I really do like the scope.
-----------------------------------
Q:Is it compatable with Autel maxisys 906 bt?
A:Yes it is
-----------------------------------
Q:how well does it work for relative compression testing
A:It is the worst for relative compression tearing. I have tried every method to do relative compression and it is a mess
-----------------------------------
Q:Is this compatable with my maxisyst 808 ?
A:No, it is not compatible. However, if you have a laptop you can download the software to work with the scope
-----------------------------------
Q:will it work on windows 7 professional
A:It will operate on any Windows 7 or 8 system
-----------------------------------
Q:Will this work with the maxisys mini?
A:Not familure with that scanner. I use the Elite and a laptop. Its well worth the money. The Autel web site should answers.
-----------------------------------
Q:I saw in a question that the autel mp408-basic maxiscope basic kit comes with test leads and adapters. what type of connectors does it have? bnc?
A:Yes bnc
-----------------------------------
Q:What software and drivers do I need to use it with a pc?
A:You have to download the software from Autel's website
-----------------------------------
Q:Will this work with the MS906
A:Dear Jamie, no, it works in combination with your PC or MaxiSys Tablet (such as MS908, MS908P), not MS906. For details of MS908 or MS908P, please click here https://www.amazon.com/dp/B06WRSXPX1
-----------------------------------
Q:I have a couple questions, does it have an option to choose which automotive sensor your working on? And will it work with maxisys 906?
A:bought it as a gift for employee i have not ever used it sorrty
-----------------------------------
Q:Can this be used with an android based tablet?
A:Yes it can but you need to download the software for it first. I recommend you search the internet and download the software before you purchase it.
I think you can find some You tube post about it. Don't expect too much help from Autel though.
-----------------------------------
Product Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Autel MaxiScope MP408 based 4-channel automotive oscilloscope with PC or MaxiSys Tablet C01A109A01 Autel MaxiScope MP408 based 4-channel automotive oscilloscope with PC or MaxiSys Tablet
$ 459.0000 In stock

Join our community