Autel XP400 key and Chip Programmer IMMO Key Reprogramming Tool work with Autel MAXIIM IM508 IM608

XP400 work with Autel MaxiIIM IM508 / IM608 to do advanced key progeamming work, connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information and other key related functions.

XP400 is the upgrade option for the IM100 / programming tools that adds:

• * BMW Cas4/Cas3/Cas2 Key Learning
• * ECU - Read / Write
• * MC9S12 Encryption Chip - Read / Write 
• * IC Card - Read / Write
• * Mercedes Infrared Key - Read / Write
• * Remote Frequency Detect
• * PC Support
• * The XP400 can also be used with a PC for EEPROM.
• * Comes with a blow-molded case to store the XP400 in.
• Autel XP400 KEY & CHIP PROGRAMMER Introduction:
  
  Connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions. The XP400 includes 12 ports:

1. DC Port – provides 12V DC power supply.
2. USB Port – provides data communication and 5V DC power supply.
3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
4. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.
5. IC Card Induction Area
6. Vehicle Key Slot – holds the vehicle key.
7. Transponder Slot – holds the transponder.
8. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 11
9. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
10. Status LED – indicates the current operating status.
11. Locker – locks the EEPROM component transponder slot to ensure proper functioning.
12. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.

DC Port :  Provides 12 V power supply for the XP400.
USB Port: Provides data communication and power supply for handheld device, PC and XP400.
DB 26-Pin Port:
Five components can be connected to this port:
Mercedes Infrared Cable
APA102 – Remote Match Cable (optional)
APA104 – ECU Cable
APA105– MCU Cable
APA106 – MC9S12 Cable