Car Repair Tool - OBD2 Scanner - Car Diagnostic Tool

TOPDON Artilink200 OBD2 Code Reader for MIL Turn-off I/M Readiness DTC Reading/Clearing Checking Freeze Frame and VIN Retrieval

SKU: C11A009A01
Free Shipping to: United States

Availability: In stock

Regular Price: $34.99

Special Price: $32.99 6% Off

TOPDON Artilink200 OBD2 Code Reader is economic diagnostic device for MIL Turning Off, Emission Testing, I/M Readiness, Checking Freeze Frame and VIN Retrieval. It is cheap but performance good. Its size is small & compact and weight is very light, moreover, operations are very simple, it is very portable and convenient for customers family using.


● TOPDON Artilink200 support Multiple Languages: English, French, German, Spanish and Dutch.


TOPDON Artilink200 is a DIY dianostic device, you could do a diagnosis by yourself without driving your car to workshops.


TOPDON Artilink200 is suitable for most vehicles from 1996 to current. If not sure whether your vhicles could be supported, please contact us before you placing order.


● If your car does not meet the Exhaust Emission standard, you may get the fines ticket. To avoid getting the ticket, you could use TOPDON Artilink200 to do a quick vehicle status checking before your driving out.


● You can use Artilink200 this OBD code reader to read & clear the troubles codes if the check engine light is on, including current DTCs, pending DTCs and Permanent DTCs, then fix the problem to turn off Check Engine Light.


 

TOPDON Artilink200 OBD2 Code Reader is for MIL Turn-off I/M Readiness DTC Reading/Clearing Checking Freeze Frame and VIN Retrieval. It is cheap but performance good. Its size is small & compact and weight is very light, moreover, operations are very simple, it is very portable and convenient for customers family using.
Product Details
Title:
TOPDON Artilink200 OBD2 Code Reader for MIL Turn-off I/M Readiness DTC Reading/Clearing Checking Freeze Frame and VIN Retrieval
Bullet Points:
• MIL TURN-OFF: OBD2 code reader TOPDON Artilink200 supports reading and clearing codes stored in vehicle ECU about partial Engine and Transmission faults, and it makes great sense in the check engine light turning off after the maintenance.

• I/M READINESS CHEKING: The I/M readiness status checking works on the sensors related to emissions, checking the sensors’ running status to figure out whether your vehicle pass the emission test or it’s time to have your vehicle maintenance.
• DATA RETRIEVAL: Freeze frame data retrieving checks the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs, and vehicle identification number retrieving helps users identify vehicle information.

• SUITABLE VEHICLES: Code reader TOPDON Artilink200 is suitable for most 1996 US-based, 2000 EU-based and newer vehicles that is equipped with 16pin port and is compliance with OBD2/CAN protocols.

• WARRANTY: TOPDON warrants to its customers that this product will be free from all defects in materials and workmanship for a period of one (1) year from the date of the original purchase, subject to some terms and conditions.
Description:
TOPDON, as a new company rising in automotive aftermarket who is dedicated to focus on product development & innovation, attaches due importance to user experience with a group of distinguished experts and engineers who ensure every product is well-designed and user-oriented.

TOPDON Artilink200, featuring codes reading/clearing, the check engine light turning off, I/M readiness status checking, freeze frame data viewing and vehicle identification number retrieving, is truly the ultimate must-have OBD2 code reader in efficiency and affordability for beginners looking for a fast and accurate solution to partial of engine and AT systems.
Features:
1. TOPDON Artilink200, as one of the entry-level OBD2 coder readers in TOPDON series, is equipped with basic OBD functions to help you enhance the effectiveness of diagnostic work on partial parameters’ running status in Engine and AT systems:
• Reading Codes: Show the detailed description of the current Diagnostic Trouble Code (DTC); Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
• Erasing Codes: Turns off Check Engine Light (MIL), clears codes and resets monitors.
• I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Reading Freeze Frame Data: Allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected.
• Reading Vehicle Identification Number: Reads and displays the VIN for users to identify the vehicle information, the WM1, VDS, and VIS.

2. TOPDON Artilink is equipped with 16pin connector, which is suitable for most OBD2/CAN protocol vehicles.

3. Equipped with a 105cm (41.34 inches) connecting cable, it enables users to have a convenient diagnosis sitting in the driver seat or standing outside the vehicle instead of bending in the driver seat.

4. This code reader is made of ABS plastic, and together with rubber keys. It’s an ideal tool for basic OBD problem solving.

5. Being designed with black-and-white LED screen (128 * 64 pixel), this code reader is great for data analyzing, even in the bright light, all the information are clearly displayed.

6. Code reader TOPDON Artilink200 features built-in OBD2 DTC lookup library which shows code and code means directly instead waste time in searching codes definition identification on internet.

7. Unlike other lower-leveled versions, it supports ALL OBD2 protocols, including K Line, L Line, Double CAN, J1850 PWM, and J1850 VPW Communication Protocols.

8. Multiple Languages supported: English, French, German, Spanish, and Dutch.

9. There are 4 buttons on AL200, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu.

10. No any Batteries or Charger needed to power the code reader on, you can directly use it with power from the OBDII Data Link Connector in your vehicle.

Warranty:
12-month warranty for any possible quality problems.
Tips:
Feel free to get technical support via email/Q&A, or hotline on our official site, Facebook or Twitter, if you are unsure if the scanner tool is suitable for your vehicle, or any questions.
Specifications:
Display: Backlight, 128 x 64 pixel display
Operating voltage: 9~16V
Operating Current: 40~50mA
Energy Consumption: 0.6W
Power: 8 to 18 volts supplied by car battery
Vehicle Diagnosis Protocol: K Line, L Line, Double CAN, J1850 PWM, J1850 VPW Communication Protocol
Main chip model: Binding chip
Interface Type: OBD II 16PIN Standard Interface
Length: 105cm
Product Material: ABS plastic, rubber keys
Product Weight: 202g (0.45lb)
Package List:
1 * Main Unit
1 * User Manual

Use spaces to separate tags. Use single quotes (') for phrases.

Product Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

TOPDON Artilink200 OBD2 Code Reader for MIL Turn-off I/M Readiness DTC Reading/Clearing Checking Freeze Frame and VIN Retrieval TOPDON Artilink200 OBD2 Code Reader for MIL Turn-off I/M Readiness DTC Reading/Clearing Checking Freeze Frame and VIN Retrieval
$32.99 In Stock, Buy now!

Join our community